T200 Series Low Pressure
Maximum Flow: 202 gpm (764 l/min) 6925 BPD Maximum Pressure: 2000 psi (138 bar)
| Maximum Flow: | 202 gpm (764 l/min) 6925 BPD |
| Maximum Pressure: | 2000 psi (138 bar) |
Diaphragm Pump Features
Low Pressure Models T200E, T200F, and T200G
- Integrates Wanner Hydra-Cell® Pro seal-less pump technologies for the highest levels of volumetric and energy efficiencies across a full rpm range.
- Patented ADPC (Advanced Diaphragm Position Control) and hydraulic oil management system protect diaphragms under closed or restricted inlet conditions.
- Can run dry indefinitely without damage to the pump.
- Pumped fluid is 100% contained – zero environmental impact, no ground contamination, no volatile emissions.
- Seal-less design eliminates leaks, hazards, and the expense associated with seals and plunger packing.
- Exceeds API 675 standards for accuracy, linearity, and repeatability.
- Reliably handles a wide range of viscosities and shear sensitivities, corrosive fluids, abrasives, slurries, and particulates.
- Reduced ownership costs – acquisition, operation, service, maintenance, and energy use.
T200 Series Low Pressure Resources
T200 Low Pressure
| Model | Flow Capacities @ Pressure psi (bar) | rpm | gpm | l/min | BPD |
|---|---|---|---|---|---|
| T200E | 1500 (103) | 400 | 202 | 764 | 6925 |
| T200F | 1750 (120) | 400 | 172 | 651 | 5896 |
| T200G | 2000 (138) | 400 | 145 | 548 | 4971 |
| Model | Delivery @ Pressure psi (bar) | gal/rev | liters/rev |
|---|---|---|---|
| T200E | 500 (34) | 0.514 | 1.94 |
| 1000 (69) | 0.510 | 1.93 | |
| 1500 (103) | 0.506 | 1.92 | |
| T200F | 500 (34) | 0.437 | 1.65 |
| 1000 (69) | 0.434 | 1.64 | |
| 1750 (120) | 0.431 | 1.63 | |
| T200G | 500 (34) | 0.367 | 1.39 |
| 1000 (69) | 0.365 | 1.38 | |
| 2000 (138) | 0.363 | 1.37 |
| rpm | |
|---|---|
| Maximum: | 400 |
| Minimum: | 40 |
| Consult factory for speeds less than 40 rpm |
| Maximum Discharge Pressure | |
| Metallic Heads: T200E | 1500 psi (103 bar) |
| Metallic Heads: T200F | 1750 psi (120 bar) |
| Metallic Heads: T200G | 2000 psi (138 bar) |
| Maximum Inlet Pressure | 500 psi (34 bar) |
| Operating Temperature | |
| Maximum: | 180 ̊F (82.2 ̊C) |
| Minimum: | 40 ̊F (4.4 ̊C) |
| Consult factory for temperatures outside this range | |
| Maximum Solids Size | 800 microns |
| Input Shaft | Right Side (left side available on request) |
| Inlet Ports | Weld-On: 6 inch / SCH. 40 |
| 6 inch NPT, 6 inch Class 300 RTJ ANSI Flange | |
| Discharge Ports | Weld-On: 3 inch / SCH. 160 |
| 3 inch NPT, 3 inch Class 2500 RTJ ANSI Flange | |
| Plunger Stroke Length | 5 inch (127 mm) |
| Shaft Diameter | 4 inch (101.6 mm) |
| Shaft Rotation | Uni-directional (see rotation arrow) |
| Oil Capacity | 80 US quarts (75.7 liters) |
| Pump Weight | 3500 lbs (1588 kg) |
| Fluid End Materials | |
| Manifold: | Nickel Aluminum Bronze (NAB) |
| Duplex Alloy 2205 Stainless Steel | |
| CF3M (316L) Stainless Steel | |
| Hastelloy CX2MW | |
| Diaphragm/Elastomers: | Aflas |
| FKM | |
| Buna-N | |
| Diaphragm Follower Screw: | 316 Stainless Steel |
| Duplex Alloy 2205 Stainless Steel | |
| Hastelloy C | |
| Valve Spring Retainer: | Nitronic 50 |
| Hastelloy C | |
| Check Valve Spring: | Elgiloy |
| Hastelloy C | |
| Valve Disc/Seat: | 17-4 Stainless Steel |
| Nitronic 50 | |
| Hastelloy C | |
| Inlet/Outlet Valve Retainer: | 316 Stainless Steel |
| Duplex Alloy 2205 Stainless Steel | |
| Hastelloy C | |
| Power End Materials | |
| Crankshaft: | Forged Q&T Alloy Steel |
| Connecting Rods: | Ductile Iron |
| Crossheads: | Ductile Iron |
| Crankcase: | Ductile Iron |
| Bearings: | Spherical Roller (main) |
| Steel-backed Tri-metal (crankpin) | |
| Bronze (wristpin) |
| Datasheets | |
|---|---|
| T200 Low Pressure Specifications |  |
