MT8 Low Pressure Metering Pump
Maximum Flow Rate: 8.00 gph (30.28 lph) Minimum Flow Rate: 0.06 gph (0.227 lph) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
| Maximum Flow Rate: | 8.00 gph (30.28 lph) |
| Minimum Flow Rate: | 0.06 gph (0.227 lph) |
| Maximum Pressure: | 1500 psi (103 bar) for Metallic Pump Heads |
MT8 Low Pressure Metering Pump
Low Pressure Model MT8
- Integrates Wanner Hydra-Cell® Pro seal-less pump technologies for the highest levels of volumetric and energy efficiencies across the full turndown – from 100% to 1% of rated flow – for accurate metering performance.
- Multiple diaphragms deliver a very low-pulse flow, eliminating pulsation dampeners and pipe strain in most applications, with reduced acceleration head losses and a wider process window.
- Patented ADPC (Advanced Diaphragm Position Control) protects diaphragms under closed or restricted inlet conditions.
- Exceeds API 675 standards for steady-state accuracy (±1%), linearity (±3%), and repeatability (±3%) over a wide adjustable range.
- Hydraulic oil management system replenishes on every back stroke, ensuring superior accuracy and reliable operation at low- and high-suction pressures.
- Valve set design and material options reliably handle a wide range of viscosities and shear sensitivities, plus corrosive liquids, abrasives, slurries, and suspended solids.
- Pumped liquid is 100% contained, preventing degradation and contamination.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use – with a 20+ year design life.
MT8 Low Pressure Pump Resources
MT8 Low Pressure - Specifications
| Diaphragms per Liquid End | 3 |
| Steady State Accuracy | ±1% |
| Linearity | ±3% |
| Repeatability | ±3% |
| Flow Control | Electronic variable speed drive |
| Maximum Discharge Pressure | |
| Metallic Heads: | 1500 psi (103 bar) |
| Maximum Inlet Pressure | |
| Metallic Heads: | 500 psi (34 bar) |
| Operating Temperatures (min./max.) | |
| Metallic Heads: | 40°F (4.4°C) to 250°F (121°C) |
| Consult factory for correct component selection for temperatures from 160°F (71°C) to 250°F (121°C) | |
| Inlet Port | 1/4 inch NPT or BSPT |
| Diaphragm Material Temperatures (min./max.) | 40˚F (4.4˚C) to 250˚F (121˚C) |
| Discharge Port | 1/4 inch NPT or BSPT |
| Maximum Solids Size | 200 microns |
| Shaft Rotation | Bi-directional |
| Oil Capacity | 1.75 US quarts (1.7 liters) |
| Suction Lift Capability | 20 feet (6.1 meters) |
| Weight (less motor) | |
| Metallic Heads: | 80 lbs (36 kg) |
Datasheets
| Datasheets | |
|---|---|
| HCMS MT8 Bulletin |  |
Manuals
Accessories
| Files | |
|---|---|
| HCMS Accessories Catalog | |
| Files | |
|---|---|
| MT08 56C Gearbox | (STEP File) |
| Files | |
|---|---|
| MT08-N-BP | |
| Planetroll Assy | |
